The swimming ring is a product when swimming in water. The interior of the swimming ring is filled with gas and can float on the water. In summer, many people like to go to the beach or swimming in the swimming pool. People who can't swim will use swimming rings. So when the swimming ring is out of gas, how to inflate the swimming ring with an inflatable cylinder? How to inflate and deflate the swimming ring? The following Kottoyi Factory will take you to understand the method of inflating the swimming ring inflator.
1. How to inflate the inflatable cylinder of the swimming ring
1). First inflate the front air bag (the picture is the front), pull out the air nozzle from the air bag, open the air nozzle cover, insert the air tube of the air cylinder and press it against the air nozzle of the swimming ring, pinch it with the thumb and forefinger, and fill the air volume. To 60% (pinch and press the inflated air bag with fingers, about 2kg force, press down about one finger depth on the female finger surface, to reach 60% of the air volume).
2). Recharge the reverse airbag, the total air volume reaches 90%, plug the valve cover tightly with both fingers, and then press the valve into the airbag.
3). Note: Inflate should be done slowly.
2. How to cheer up in a swimming ring
1). Wipe the inflatable port of the swimming ring to prevent foreign matter from being blocked, and gently pull out the inflatable cutting door.
2). Or push it out to make it protrude on the surface of the swimming ring, open the stopper, and insert the straw into the cutting door vertically.
3). Push the suction tube slightly to open the inner wall of the cutting door, or let the suction tube pass through the cutting door and enter the inner tank of the swimming ring.
4). Blow in with your mouth. After filling, pinch the part where the straw is connected to the inflation port with your hands. Pull the straw out of your mouth, and cover the swimming ring with a soft stopper in time to prevent air leakage.
5). Be sure to press the inflatable valve into the swimming ring to prevent the danger of air leakage caused by scratching or peeling off the soft plug.
3. How to deflate the swimming ring
When deflating, you can use a clip or a toothpick or the like to extend inward from the air hole and press it inward.
The above is "How to inflate the swimming ring with an inflatable cylinder? How to deflate?", if you want to know more about Pool floats, please contact us to answer your questions.